Motorola 9500 - Manual (Page 160)

156 Customizing Phone Features
1-2: Getting to Phone Setup...
1. Press
M
until you see Phone Setup , and then press
O
.
2. Press
M
to scroll to one of the features below.You will see the
feature name, along with Select? .
r System Scan
Satellite
Mode This feature does not apply to satellite mode. You
will not see this menu option in this mode.
Cellular
Mode
(CDMA/
AMPS) The System Scan feature lets you select the type of
cellular system your phone accesses. This feature is
configured by your cellular service provider.
Select a System Scan Method
Your system ID is shown on your display when you
are registered with the system. An A indicates you
are registered with an analog system and a D
indicates you are registered with a digital system.
1. Follow the steps in “1-2: Getting to Phone
Setup...” to get to System Scan , and then
press
O
to select.
2. Press
<
to scroll to Std A/B , Scan A/B,
Std B/A , Scan B/A , Scan A , Scan B , Home
Only , or Preferred SIDs , and then press
O
to select.
See the table on page 157 for a detailed
description of these settings.
3. Press and hold
C
to exit the menu.