Motorola 9500 - Manual (Page 66)

62 Using In-Call Features
r Sending a Flash
Satellite
Mode This feature only applies to CDMA/AMPS cellular
users.
Cellular
Mode
(CDMA/
AMPS) Many CDMA/AMPS network features (for example,
Call Waiting, Call Holding, Call Forwarding) require
you to send a “flash” over the air during a call to
access them. This is similar to when you press the
switch hook on your conventional phone in your
home or office to switch between calls. The flash
alerts the network that you want to use a particular
network feature. Your service provider will provide
you with the appropriate codes to send with the
flash for the features to which you have subscribed.
To send a phone flash:
1. Press
M
while you are in a call. You will see
Flash Options followed by Select?
2. Press
O
. You will see Send Flash?
3. Enter the access code for the feature you
want to access, if necessary, and then
press
O
to send the flash.
or
Press
C
to cancel the flash.
Cellular
Mode
(GSM) This feature only applies to CDMA/AMPS cellular
users.