Miele G 2630 SCi - Manual (Page 47)

Dealer
=
Demo modes are only for
showrooms.
The dishwasher has three demo
programs for showrooms.
The programs "Demo mode" and
"Endless demo mode" show the use
and function range of the dishwasher.
– Demo mode :
The program is started by pressing
any button. It runs once and must be
started again.
– Endless demo mode :
The program starts as soon as it is
activated and runs in a loop until it is
turned off.
– Demo wash sound :
The program activates the pumps to
demonstrate the wash sound.
Turning the demo mode on
^ Select the desired option.
^ Confirm the message Demo mode
Activate? with OK.
^ Press any button to start the selected
demo mode.
^ To cancel the demo mode press any
button again and confirm with OK.
Turning the demo mode off
^ Select Off and confirm with OK .
The display changes into the menu
"Settings J".
Factory default
{
All settings can be reset to the factory
default.
^ Select Reset and confirm with OK.
Leaving the Settings menu
^ Select Back and confirm with OK.
The display changes to the program
menu.
Settings
J
47