Miele G 2630 SCi - Manual (Page 48)

With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Issue Possible fault Solution
After the dishwasher was
turned on with
s , the
display stays off and the
"Start" indicator does not
flash.
The machine is not
plugged in. Insert the plug.
The fuse has
tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The dishwasher stops
during a program. The fuse has
tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
The buzzer sounds.
The display shows the
following:
Technical fault FXX
Call Technical Service
There may be a
technical fault. Turn the dishwasher off s.
After a few seconds:
– Turn the dishwasher on.
– Select the desired program
with the program selection
buttons.
– Press the "Start" button.
If the problem persists, call
Technical Service.
The buzzer sounds.
The display shows the
following:
Fault
Waterproof F70
Close water faucet
The waterproof
system has
activated. – Turn off the water supply.
– Call Miele Technical
Service.
Frequently asked questions
48