Motorola Cell Phon - Manual (Page 109)

109
Netw
or
k Selection
Note: The phone is registered with the
selected network until you place or receive a
call or until you turn the phone off and on.
If registration is not successful, you see Not
Available. (Registration can fail if you travel
outside the network range after you locate
the network but before you attempt to
register.) Press
e
to exit, and retry later.
Selecting a New Network
To search for and select a new network:
1. Follow “Getting to Network Selection” on
page 108 to scroll to New System Search, and
press
=
to activate a search.
2. Follow the appropriate instructions below:
If You See This
Message:
Do the Following:
Search Done:
[ network ID]
• To search for the next best
network, press
c
.
When you see the desired
network, go on to step 3.
• To cancel the search and
exit the menu, press
e
.
Search All Bands? • To continue searching for
networks in another band,
press
=
.
When you see the desired
network, go on to step 3.
• To cancel the search and
exit the menu, press
c
.
Not Available Press
e
to exit, and retry
the search later.
Non-Public Not
Found The phone returns to standby
mode.
Retry the search later.