Motorola Cell Phon - Manual (Page 58)

58
Storing and Placing Numbers
for Calling Card Information
Storing Calling Card Information
Like Pause Dialing, you can store calling card
access numbers, separated by pauses, for recall
later. You can also store a Number Character in the
memory sequence to save a place for the number
you call when you use your calling card.
See “Using Lock/Security Features” on page 85 for
more information on protecting your calling card
information.
1. Follow the steps in “Getting to Phone Book”
above to select Store Name and Number. You
see Enter Number.
2. Enter the phone number you use to access
your calling card system. (Skip this step if
you only dial 0.)
3. Press
f S
. You see Insert Wait o.
4. Press
=
to insert a pause (o) into the
sequence.
5. Enter the next numbers, if needed. (For
example, some long distance carriers require
you to dial a 0 first. If no further numbers are
needed, skip to step 7.)
Getting to Phone Book
1. Press
f
, then press
=
to enter the menu system.
2. Press
>
or
<
to scroll to Phone Book , and press
=
to select.
3. Press
>
or
<
to scroll to the following features, and press
=
to
select.