Miele W4802 - Manual (Page 15)

Final spin speed
Program
Normal Max
Wrinkle-free High
Sanitize Max
Extra White Max
Delicates Med
Woolens High
Express Max
Sturdy High
Custom Max
Clean Machine –
The final spin speed can be reduced, if
the program allows changes. The
selection of a final spin speed higher
than that shown above is not possible.
Rinse spin
The laundry is spun after the main wash
and between rinse cycles. Reducing
the final spin speed will also reduce the
rinse spin speeds.
Hold
^ Select "Hold". The laundry is not spun
and remains soaking in water. This
will prevent wrinkles if the laundry is
not removed immediately at the end
of the wash program.
– Selecting / Starting the final spin
The washer is set by default to the
maximum spin speed of the wash
program.
^ You can select a lower spin speed.
Press "Start" to start the final spin.
– Finishing the program
^ Press the "Pause" button until the
program ends.
No spin
(Deselect rinse spin and final spin)
^ Select "No Spin". The water is drained
away after the last rinse.
Using the washer
15