Miele W4802 - Manual (Page 51)

Drainage
The 5 ft (1.5 m) drain hose may be
connected as follows:
1. Directly into a sink: hook the hose
over the edge of the sink and secure
it firmly (e.g. by tying the hose to the
water faucet).
2. To a stand pipe: place the drain hose
into a 1 ½" (4 cm) stand pipe and
secure it firmly.
3. To a floor drain: The machine is
equipped with an air gap /
anti-siphoning system so that no
minimum drain height is required.
^ The machine drains using a pump
with a maximum delivery height of 4 ft
(1.2 m).
^ Make sure there are no kinks in the
drain hose.
If necessary, the drain hose may be
extended to run a maximum of 16 ft
(4.9 m), as long as the 4 ft (1.2 m)
height is not exceeded. Hose
extensions are available from Miele.
Plumbing
47