Memorex MMP8620 - Manual (Page 26)

26
USING THE MyDJ PLUG-IN (CONTINUED)
The box that appears will display the total number of tracks you have in your WMP
library, the number of tracks that are ready to be used on this unit and the number of
tracks that could use further validation or extended analysis.
NOTE: Selecting a “Processor Load” of “Maximum” may significantly impact the
performance of your computer. If you intend to use your computer while running
“Extended Analysis” in the background, select “Low”.
Checking for Mixable Tracks
In order to use the MyDJ feature on this unit, you will need to add at least 25 tracks that
have been analyzed using the MyDJ Plug-In. You can enable a column within WMP 10
that will indicate if the track is MyDJ ready by following the steps below:
1. In WMP 10, right-click on one of the column headings within your library.
2. Click on “More…” at the very bottom of the list.
3. In the window that appears, ensure that there is a check next to “Custom 1”.
4. Click the “OK” button to save the preferences.
5. Within your library, scroll to the right until you see the “Custom 1” column.