Memorex MMP8620 - Manual (Page 32)

You can use the previously installed MediaCoder to convert MPG, MPG4, ASF, AVI and
WMV files to AVI files supported by the player.
1. Open the previously installed MediaCoder
program.
2. Change the Interface mode from Simple mode
to Normal mode in the Options>User Interface
Mode pull-down menu.
3. Click the “Add file” icon to add files for
conversion. In the “Add file” window select the
source file you want to convert and click the
“Open” button. The file is now added to the
“convert” window. Repeat this procedure if you
want to add other files for conversion.
4. Set up the Destination Path for the converted files. In the “Output Folder” window, type
the path of the directory where the converted files will be saved.
5. Set up the advanced conversion settings. There are many items in the advanced
settings, most of them do not need to be changed; keep the default settings. Make sure
that the Video and Picture options are configured as below:
Video: Backend: MEncoder; Codec: XviD; Format: AVI
Picture: Resize: 176x144, 208 x 176, 320x240
6. After selecting all the setting options, click “Start” to begin the conversion.
7. When “Transcoding Completed Information” appears, the file has been converted.
8. Now you can convert additional files according to the above procedures, if desired.
NOTE: See page 20 for how to “drag and drop” files to the unit.
USING MEDIACODER
32