Unpacking, Components, Installing – Meridian America 506 User Manual

Page 21: Positioning, Radio interference

Advertising
background image

Setting up the CD player

16

Unpacking

The 506 24-Bit CD Player comes in a box containing the

following components:

❍ 506 24-Bit CD Player.
❍ Meridian System Remote.
❍ 1 power cord.
❍ 1 optical connector blanking plug.
❍ This manual.

You are advised to retain the packing in case you need to

transport the unit.

To position the CD player

Do not place the CD player:

❍ In direct sunlight.
❍ Near heat sources, eg a radiator.
❍ On top of a power amplifier, as the heat generated may

damage the CD player.

However, it can be stacked under a 501 Control Unit and

504␣ Stereo FM Tuner, if you have these Meridian components in

your system.

In common with all CD players, the 506 24-Bit CD Player emits

some radio-frequency signals. Therefore, you should try to keep

all power cables and network leads away from signal cables,

including audio, antenna, and loudspeaker cables.

Radio interference

FCC Warning: This equipment generates and can radiate radio

frequency energy and if not installed and used correctly in

accordance with our instructions may cause interference to

radio communications or radio and television reception. It has

been type-tested and complies with the limits set out in Subpart

J, Part 15 of FCC rules for a Class B computing device. These

limits are intended to provide reasonable protection against

such interference in home installations.

EEC: This product has been designed to comply with the limits

set out in EN55013 and EN55020C.

Advertising