Meridian America 506 - Manual (Page 27)

Setting up the CD player
22
There is interference on the radio and/
or television when the CD player is
switched on
Before following the steps below, ensure all units are switched
off first.
If this equipment does cause or suffer from interference to/from
radio or television reception then the following measures should
be tried:
❍ Reorient the receiving aerial (or antenna) or route the antenna
cable of the receiver as far as possible from the 506 24-Bit CD
Player and its cabling.
❍ Ensure that the receiver uses well-screened antenna cable.
❍ Relocate the receiver with respect to the CD player.
❍ Connect the receiver and this product to different AC outlets.
The display shows No disc when
attempting to play a disc
❍ Check that the disc is positioned correctly in the drawer, with
the label uppermost; see To insert a disc, page 7.
❍ Try playing another disc. If this disc works, check the problem
disc for signs of dirt or damage.
The display shows Error when
attempting to programme a disc
❍ Check that the disc includes the track number you are
attempting to programme.
❍ Check that you have not already programmed 31 tracks, the
maximum number.