Miller Electric OM-234 016D - Manual (Page 35)

OM-234 016 Page 26
B. Weld Parameter Chart For Millermatic Passport Plus Model
.030”(0.8 mm)
.030”(0.8 mm) Min/10 1.5/20
.035”(0.9 mm) .5/10 1.5/15
.030”(0.8 mm) Min/10 2/20
.035”(0.9 mm) Min/5 2/15
.035”(0.9 mm)
Aluminum
Spool Gun Aluminum
4043ER 100% Argon
Steel
Stainless
Steel
Stainless
Steel
(DCEP)
Flux Core
E71T−11
(DCEN)
Solid Wire
ER70S−6
(DCEP)
No gas required
CO2
100%
C25
75% Ar / 25% CO2
Tri−Mix
90% He / 7.5%
Ar / 2.5% CO2
.024”(0.6 mm) Min/40
.024”(0.6 mm) Min/20 1.5/25
.030”(0.8 mm) Min/25
.035”(0.9 mm) Min/15
.024”(0.6 mm) Min/20 2/30
.030”(0.8 mm)
.035”(0.9 mm)
Selecting Wire, Gas and Control Settings for Aluminum with
24 ga.
115/230V
20/22 ga.
115/230V
1. Number on left of
slash is Voltage
Knob Setting.
(Example: 4.5 / 55)
2. Number on right
of slash is Wire
Speed Knob Setting.
(Example: 4.5 / 55)
Refer to chart below to select Voltage and Wire Speed
based on thickness of material being welded.
Reference Key
* 230 Volt Only
** For Flux Core or
Stainless Wire