MPI Technologies FCX - Manual (Page 3)

  
,  ,1752'8&7,21
  352'8&7 '(6&5,37,21
Model FCX oil fired boiler utilizes a sealed combus-
tion system that operates at a temperature at which
the flue products will condense. The flue products
temperature is so low that the unit is suitable for use
with PVC / Polypropylene flue pipes, which are offe-
red as standard options for installation. Model FCX
is approved for installation with zero clearance to
combustible materials by Intertek Testing Services
to the UL Standard for Oil Fired Storage Tank Water
Heaters (UL 732).
Model FCX is completely assembled and provides
standard parts as follows:
• An enameled steel cabinet with thick insulation
• A completely unitized, thick shelled boiler with
combustion chamber and a heat exchanger
with a system of removable baffles
• A stainless steel condenser, with condensate
drain
• A high efficiency, low emission, gun type oil
burner with combustion air fan, integral oil
pump, oil heater and primary control
• A control panel assembly and all electrical con-
trols for operation of the boiler, including a wa-
ter temperature thermometer in circuit 1
• A manual water-mixing valve that can be mo-
torized if desired
• A safety pressure relief valve
• An expansion tank
• A water circulating pump
• Complete internal water piping terminating in
connections for two independent water-hea-
ting circuits.
• Complete internal air piping terminating in a
connection to a coaxial flue/combustion air in-
take system.
Standard options include:
• Coaxial balanced flue system components for
connection to the boiler to provide venting of
the flue products and combustion air intake.
8.
94
17
.7
34
.0
34.
4
2.28 5.98 5.55
2.20
2.20
34.6
34.
4
27.5 23.7
39.
1
Front view Side view Rear view