Installation instructions, Tools you will need – Moffat 350A4502P5661 User Manual

Page 7

Advertising

PART

QUANTITY

Grease Filter only (JV338)

Charcoal Filter only

(JN327 and RN328)

Grease Filter and Charcoal

Filter (JV347, JV348 and JV367)

Mounting Screws

(8 - 18 x 3/4 Phillips pan head)

Exhaust Adaptor

(for 3¼” x 10” rect. venting)

Exhaust Adaptor Screw

(8 - 18 x 3/8 Phillips pan head
or hex head)

• If the unit is damaged in shipment, return the unit to the

store in which it was bought for repair or replacement.

• If the unit is damaged by the customer, repair or

replacement is the responsibility of the customer.

• If the unit is damaged by the installer (if other than

the customer), repair or replacement must be made
by arrangement between customer and installer.

DAMAGE – SHIPMENT/INSTALLATION

PARTS INCLUDED*

MOUNTING SPACE*

NOTES:
• This range hood is for installation over ranges or

cooktops up to 36” wide.

• If you are going to vent your range hood to the

outside, see the “Ducting Requirements” section
for exhaust duct preparation.

66” or more
from the floor
to the top of
the hood

30” or 36”

30”
min.

Bottom edge of

cabinet needs

to be 30” or