Maxtor 1925 - Manual (Page 23)

Product Specifications
Quickview 40 20/30/40GB AT 3-7
3.10 Reliability Specifications
Annualized Return Rate
<1.0% Annualized Return Rate (ARR) indicates the average against
products shipped. ARR includes all reasons for returns
(failures, handling, damage, NDF) but does not include
inventory credit returns.
Load/Unload Cycles
100,000 This indicates the average minimum cycles for reliable load/
unload function.
Data Reliability
<1 per 10e15 bits read
Data errors (non-recoverable). Average data error rate
allowed with all errorrecovery features activated.
Component Design Life
5 years (minimum)
Component design life is defined as a.) the time period
before identified wear-out mechanisms impact the failure
rate, or b.) the time period up to thewear-out point when
useful component life expires.
3.11 EMC/EMI
3.11.1 Radiated Electromagnetic Field Emissions - EMC Compliance
The hard disk drive mechanism is designed as a subassembly for
installation into a suitable enclosure and is therefore not subject to
Subpart J of Part 15 of FCC Rules (47CFR15) or the Canadian
Department of Communications Radio Interference Regulations.
Although not required, the disk mechanism has been tested within a
suitable end-use product and found to comply with Class B limits of the
FCC Rules and Regulations of the Canadian Department of
Communications.
The CE Marking indicates conformity with the European Union Low
Voltage Directive (73/23/EEC) when the disk mechanism is installed in
a typical personal computer. Maxtor recommends that testing and
analysis for EMC compliance be performed with the disk mechanism
installed within the user's end-use application.