Motorola GP68 - Manual (Page 26)

26
Model ST-865M3 SmarTrunk II™ Logic Board
3.2 Installation of the ST-865M3 Logic Board
a. Dismantle the radio by first removing the chassis from the front
housing. (Refer to section 3.1 instructions for disassembling
the radio).
b. Orientate the ST-865M3 Logic Board so that the 12 pin male
connector is at the lower edge and facing downwards.
(See figure 3-4)
c. Attach the ST-865M3 Logic Board to the controller board by
inserting the 12 pin male connector into the 12 pin female
connector on the Controller Board. Push until it is securely in
place.
Figure 3-4 • Exploded View of the radio with Optional
SmarTrunk II Logic Board