Motorola GP68 - Manual (Page 35)

4 • ST-865M3 Programming
35
A priority override is possible only if the subscriber
engaging the priority override has a higher priority level
than the current subscriber on a channel. There are ten
priority levels, from 0 (lowest priority) to 9 (highest pri-
ority). The priority level of a SmarTrunk II subscriber is
determined by the first digit of the subscriber’s Primary
code.
For example, a subscriber with a Primary code of 2468
(priority level 2) is currently using a trunking channel.
If a subscriber with a subscriber ID code of 6722 (prior-
ity level 6) tries a priority override on the same trunking
channel, the override will be successful. The call in
process will be terminated and subscriber 6722 will be
granted access to the channel. If a subscriber with a
Primary code of 1234 (priority level 1) tries a priority
override on that trunking channel, the override will be
unsuccessful since the latter subscriber has a lower
priority level. The original subscriber on the channel
cannot be overridden by another subscriber with an
equal priority level. If a subscriber with a Primary code
of 2401 (priority level 2) tries a priority override on the
same trunking channel, the override will be unsuccess-
ful.
To program this feature: Enter the programming code
14 followed by the # key. Then 1 (enable) or 0 (disable)
followed by the # key.
Example: To make a subscriber a priority subscriber
press: 1 4 # 1 #.
4.2.5 Five Digit Access Code
The five digit access code allows the dealer to enter the
ST-865M3 programming mode and keeps unauthorized
personnel from accessing the programming mode. The
access code is dealer programmable, and may be set to
any five digit number 00000 to 99999.
Note: Be sure to write down the new five digit access
code. If the five digit access code is lost or
forgotten, ACCESS TO THE ST-865M3 PRO-
GRAMMING MODE WILL BE IMPOS-
SIBLE.