Miele KM 403 - Manual (Page 12)

Securing the support bars
Wood or Corian countertops
^ Arrange the bars, b, as shown in the
illustration
^ Drill 1
/
16
" ( 1.5 mm) pilot holes through
the brackets and secure them using
the supplied screws.
^ Fill the gap, c, between the bars and
the countertop using the supplied
silicon sealant.
Granite countertops
For granite countertops, the support
bars,
b, can be secured using double-
sided construction tape. Do not allow
the bars to "float", they must be secure-
ly fastened. Fill the gap,
c, between
the bars and the countertop using the
supplied silicon sealant.
The screws are not necessary for
granite countertops.
Securing the spring clamps
Wood or Corian countertops
^ Place the spring clamps, a, as
shown in the illustration.
^ Drill two 1 /
16
" (1.5 mm) pilot holes for
each clamp and secure using the
supplied screws.
Granite countertops
For granite countertops, the spring
clamps can be secured using
doublesided construction adhesive. Do
not allow the spring clamps to "float",
they must be securely fastened.
The screws are not necessary for
granite countertops.
Installation
12
c
d