Miele KM 403 - Manual (Page 13)

Locking the appliance into
place
Make sure the cooktops are aligned
correctly before setting them into the
countertop. Once the spring clamps
are engaged, a special tool is
required to release the cooktop from
the clamps.
^ Guide the power cord through the cut
out and connect the appliance to the
electrical supply.
^ Position the cooktop over the cut out.
With a hand on each side, above the
clamps,
a, press the cooktop down,
locking it into the spring clamps.
Make sure that the cooktop rim lies
flat against the countertop on all
sides.
Installation
13