Miele KM 403 - Manual (Page 15)

,WARNING:
Disconnect the appliance from the
main power supply before servicing.
To reduce the risk of electric shock,
make sure that the appliance is
properly grounded after installation.
To guarantee the electrical safety of
this appliance; continuity must exist
between the appliance and an effec-
tive grounding system. It is impera-
tive that this basic safety require-
ment be met. If there is any doubt,
have the electrical system of the
house checked by a qualified elec-
trician. The manufacturer cannot be
held responsible for damages
caused by the lack, or inadequacy
of, an effective grounding system.
All electrical work should be
performed by a qualified electrician
in accordance with local codes and
with the
- National Electrical code
ANSI / NFPA No. 70-1481
for USA
or
-
Canadian Electrical Code Part I
(CSA Standard C 22.1)
for Canada
Note to the installer:
Please leave these instructions with the
consumer.
Power supply:
– 240 V, 60 Hz, 15 A fuse rating
or
– 208 V, 60 Hz, 15 A fuse rating
The oven is equipped with a power
cord consisting of 3 leads. They must
be connected to a dedicated line
through the use of an approved
junction box
Black : connect to L1 (hot)
Red: connect to L2 (hot)
Green: connect to GND (ground):
For further information, see the wir-
ing diagram provided with the appli-
ance.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
15