Motorola XU2100 - Manual (Page 11)

19
Ge
tting S
tar
ted
X
Turning Your Radio On or Off
Turn P clockwise for On or counterclockwise for Off.
The radio chirps and the display briefly shows all features and display
segments of your XTN Series radio.
Then the radio displays the current channel (larger number in the
center) and the frequency assigned to that channel (on right).
The interference eliminator code displays briefly. Then the current
channel remains displayed.
The transmit light on the front left of the radio flashes every three
seconds when the radio is on.
Adjusting the Volume
You can set the volume by turning P.
Note: Do not hold the radio too close to your ear when adjusting the
volume or if it is at a high setting.
Using the Radio
1. Press and hold Q to check for channel activity. If you hear static, the channel is
clear to use. Do not transmit if someone is speaking on the channel. Press Q
again to stop monitoring the channel.
2. Press and hold Mand speak into the microphone. To maximize clarity, hold the
radio two-to-three inches away from your mouth.
Note: The transmit light on the front left of the radio lights red when transmitting.
3. Release M and listen for messages.
k
218
188
c
Frequency
Code
Getting
Star
ted
20
X
Basic Operation
Indicator Light
Use B to:
Transmit call tone
Use M to:
Talk
Exit a menu
Use \to:
Lock the keypad
Scroll through available menus
Use T / S to:
*Access presets
Microphone
Use P to:
Turn power on/off
Adjust radio volume
Use Accessory Jack
for:
Radio plug-in charging
Audio accessories
Use J to:
Monitor the frequency
Turn scan on/off*
Use [ and ] to:
Change channels*
Change menu settings
Speaker
* XU2600 and XV2600 only