Metrologic Instruments MS9500 Voyager - Manual (Page 18)

12
A SSEMBLING THE S TAND
There are two options for assembling the stand. The first option is a self-
supporting stand that can be moved freely about on the countertop. The second
option is used if the stand will be bolted or hard-mounted to the countertop.
Stand Option 1: Self-Supported Stand Kit #46-46128
Step 1
Slide the apron ( MLPN 50-50440)
over the stand ( MLPN 36-00454).
Figure 17.
Step 2
Position the stand so that it sits
under the tab on the apron.
Then secure the apron to the
stand using the two M3 x 6 mm
screws (
MLPN 18-18670) and the
two #5 washers ( MLPN 18-18671)
provided.
Figure 18.
Stand Option 2: Hard-Mount Accessory Kit #46-46351
Step 1
Drill four #39 holes in the countertop.
Figure 19.
Step 2
Secure the base ( MLPN 36-36080)
to the countertop with the four #8 wood
screws (
MLPN 18-18057) provided.
Figure 20.
Stand
Apron
Apron
Stand
M3 x 6 mm
Screw
#5 Washer
Tab
Base
#8 Wood
Screw
2.00 in
2.00 in