MegaVision Network Management System - Manual (Page 39)

When you open RMON Group 2 Window or select any History Control Table Entry, two
Trend Graph Windows open (in addition to the main window) to reflect the History
Table Information graphically:
• Interface Errors per interval (right window).
• Interface Utilization per interval in % (left window).
While in the RMON Group 2 Window, you may jump to any other device without selecting
it in the main map via the Device Name box (in the bottom right corner of Figure 30).
RMON Groups 3 & 9 (Alarms and Events)
You can enter this window from:
1. The Main Menu Bar (Monitor: RMON Groups 3:9...)
2. The Device Window Menu bar for certain devices.
Figure 32. RMON Groups 3,9 Window
Alarms control Table
Alarms Control Table lists the control entries for RMON Group 3 (Alarms). Every entry
contains threshold information, which describes an alarm that should be generated when a
pre-set threshold is exceeded. This table may contain entries for several of the device’s