MegaVision Network Management System - Manual (Page 60)

MegaVision Classic under Castle Rock SNMPc Network Manager
SNMPc version must be 4.x or SNMPc for Win-NT (5.x). Please note that MegaVision has
two different options for SNMPc 4.x and SNMPc NT (5.x). There is some Network
Management products, that are based on SNMPc, e.g.:
a) Fibronics InterView/Win.
b) Intel LANDesk Network Manager.
c) Cisco CiscoWorks.
If you have SNMPc or one of the products you may use MegaVision for SNMPc
to manage all the supported different vendors devices from one platform. SNMPc (or
LANDesk or InterView/Win, CiscoWorks) must be installed before MegaVision. After
MegaVision installation, it will start automatically when SNMPc starts. Open a new map.
Add some devices to the map or do SNMPc Autodiscovery. SNMPc will automatically assign
the correct icons to the MegaVision devices. When adding devices manually make sure that
the "Icon" field equals "AUTOICON”, “Type" field equals "Agent" and "Exec" field equals
"auto.exe". Double-click on the device icon will open MegaVision device main window.
IMPORTANT: If you are using SNMPc support for HP OpenView, do not install MegaVision
for SNMPc. Use MegaVision for HP OV instead. After MegaVision for HP OV installation,
MegaVision will manage all the MegaVision devices. SNMPc will manage all the others.