MITSUBISHI ELECTRIC LVP-S120A - Manual (Page 25)

25
ENGLISH
Advanced feature with PC
PCV (PC Card Viewer)
PC-CARD viewer (PCV) is a utility software that lets
you record and project an image to a PC-CARD by us-
ing a personal computer.
Environment
The following system software and hardware are nec-
essary to use the projector.
When you use a Macintosh
• Macintosh series loading 68030 or higher in
CPU and a video card with which more than
256 colors are available
• System7.1 or newer
• More than 8MB of Random-access memory
(RAM) space
When you use Microsoft ® Windows ®
• Microsoft
®
Windows
®
95 Operating System
(Windows 95) or Microsoft
®
Windows NT
®
Operating System Version 4.0 (Windows NT
4.0) or Microsoft
®
Windows
®
Operating System
Version 3.1 (Windows 3.1) with the CPU
loading 80486SX or higher and a display card
with more than 256 colors are available.
• 16MB or more of RAM available
• We recommend the following hardware.
• 32MB or more of RAM available
• A video display card with full colors are
available
EXPORT LAW ASSURANCES
You acknowledge and agree that the SOFTWARE is subject
to restrictions and controls imposed by the United States
Export Administration Act (the “Act”) and the regulations
thereunder. You agree and certify that neither the
SOFTWARE nor any direct product thereof is being or will
be acquired, shipped, transferred or reexported, directly or
indirectly, into any country prohibited by the Act and the
regulations thereunder or will be used for any purpose
prohibited by the same.
LIMITATIONS OF REMEDIES
Regardless of whether any remedy set forth herein fails of
its essential purpose, in no event will Mitsubishi be liable
to you for any special, consequential, indirect or similar
damages, including any lost profits or lost data arising out
of the use or inability to use the SOFTWARE or any data
supplied therewith even if Mitsubishi or anyone else has
been advised of the possibility of such damages, or for any
claim by any other party.
Some states do not allow the limitation or exclusion of
liability for incidental or consequential damages so the
above limitation or exclusion may not apply to you.
In no case shall Mitsubishi’s liability exceed the price for
the SOFTWARE.
Installation of software
For Windows 95 or Windows NT 4.0
1. Start up Windows.
2. Insert the Projector driver CD-ROM into your CD-
ROM drive.
3. Start up Program Manager.
Click the [Start] button and select the [Run (R)] com-
mand. Then the [Run] dialog box is displayed.
4. If you inserted the CD-ROM to drive D, type [D:
Win95\Pcv\Us\Setup95] (Windows 95) or [D:
Winnt40\Pcv\Us\Setupnt] (Windows NT) in the
"command line" text box and click the "OK" button.
The letter [D] may be different according to the
drive you use.
5. When the setup program starts up, follow the on-
screen instructions.
6. When the message “Completed” appears on screen,
click the [Finish] button to complete the installation.
• Installation of Microsoft Internet Explorer 3.02 (or
later) is required for optimum unit operation. Use
the Jaaxdist.exe command should the unit appear
to not be performing normally.
For Windows 3.1
1. Start up Windows.
2. Insert the Projector driver CD-ROM into your CD-
ROM drive.
3. Select the [Run (R)] command on the icon menu so
that the dialog box [Run] is displayed.
4. If you inserted the CD-ROM to drive D, type
[D:Win31\Pcv\Us\Setup] in the "command line"
text box and click the "OK" button. The letter [D]
may be different according to the drive you use.
5. When the setup program starts up, follow the on-
screen instructions.
6. When the message “completed” appears on screen,
click the [OK] button to complete the installation.
For Macintosh
1. Start up Macintosh.
2. Insert the Projector driver CD-ROM into your CD-
ROM drive.
3. Copy "PCV for Mac” file in the “PCV” folder to
anywhere on the hard disk.