MITSUBISHI ELECTRIC LVP-S120A - Manual (Page 32)

32
The light source lamp is designed to project the image
on the LCD panels. When the light source lamp no
longer functions, replace it with a new one to ensure
optimum performance.
Caution:
• Do not remove the light source lamp from inside of
this equipment immediately after using the projec-
tor, you may get burned because of the high tem-
perature of the light source lamp.
• When you replace the light source lamp, press the
power button to power off, then wait for 120 sec-
onds in stand-by mode to cool down the lamp and
LCD panels. Turn off the main switch, unplug the
power cord from the outlet and wait one hour so that
the lamp is cooled to the touch.
• Do not remove the light source lamp except for re-
placement. Careless treatment can cause injury or
fire.
• Do not touch the lamp element directly. It may be
broken and may cause you to injure or burn your-
self.
• Be sure not to drop the screws into the projector.
Also be sure not to insert metal or any flammable
objects, it may cause fire or an electric shock. If any
objects are inserted, please unplug and contact your
dealer.
• Install the lamp securely, failure may cause fire.
1. Stand the projector as
shownin the direction of the
arrow.
2. Loosen the screws of the
lamp lid on the top cover us-
ing a phillips screwdriver
(+) , and remove the lid.
• Remove the lamp cover in
the direction of the arrow
as indicated.
3. Loosen screws (a) using a phillips screwdriver (+),
and remove them.
Replacement of a light source lamp
4. Hold onto the projector by the handle as you pull
out the lamp.
Once the lamp has been removed, do not spill liquid
on it, place it near flammable objects or where chil-
dren can touch it. Otherwise, it will cause injury or
fire.
5. Insert the new lamp securely into the projector body
in the right direction.
6. Tighten up the screws (a) which have been removed
in step 3 using a phillips screwdriver (+).
7. Tighten up the screws of the lamp lid using a
phillips screwdriver (+).
Screw of the lamp lid
(a)
(a)
• Do not lose the screws.