Phones/cue mix section, Control room section, Talkback to studio button – MACKIE Digital 8Bus D8B v5.1 User Manual

Page 40: Clear solo button, Solo level button, Studio level button, Talkback level button, Rude solo light, Aux 9-10, Aux 11-12

Advertising
background image

D8B Manual • Chapter 2 • page 34

TALKBACK TO STUDIO button

Routes sound arriving at the in-panel Talkback

mic to the Studio outputs.

Note:

Make sure the speakers that are connected to

the Studio Outs are located in another room to avoid
feedback when the TALKBACK TO STUDIO button is
depressed.

CLEAR SOLO button

Disengages all engaged solo buttons throughout

the entire console. This is especially convenient
considering sections may be soloed across multiple
fader banks.

SOLO LEVEL button

Assigns the V-Pot in the Studio/Solo section to

adjust the solo level being fed to the Control Room
outputs. Not applicable to mixdown solo (use L/R
fader to adjust mixdown solo level).

STUDIO LEVEL button

Assigns the V-Pot in the Studio/Solo section to

adjust the output level being fed to the Studio
monitor system.

TALKBACK LEVEL button

Assigns the V-Pot in the Studio/Solo section to

control the preamp level for the in-panel Talkback Mic.

RUDE SOLO LIGHT

Blinks whenever a Solo button is engaged.

Phones/Cue Mix Section

Phones/Cue Mix 1 and 2 select the sources and
sets levels for the Phones outputs.

AUX 9-10

Assigns the Aux 9-10 mix to the Phones output.

AUX 11-12

Assigns the Aux 11-12 mix to the Phones output.

COPY MIX TO CUE button

Pressing this causes all channel settings to be

copied to the channel V-Pots for the selected CUE
MIX 1 (Aux 9-10), CUE MIX 2 (Aux 11-12), or aux
pair (Aux 1-2, 3-4, 5-6, or 7-8). This is a very quick way
to copy the MASTER L-R mix, including effects, to the
phones output, which can then be easily fine-tuned.

CONTROL ROOM button

Assigns whatever is selected in the Control Room

section to the Phones output. Solos are also routed
to the Phones output when Control Room is selected.

LEVEL V-Pot

Adjusts the Phones output level.

Control Room Section

These buttons:

Select the source for the control room outputs.

Select Main or Nearfield control room outputs.

Adjust the listening level.

2 TRACK A

DIGITAL IN 1

2 TRACK B

DIGITAL IN 2

2 TRACK C

MASTER

L-R

NEAR FIELD

MAIN

DIM

TALKBACK

CONTROL ROOM

SPEAKER LEVEL

MONO

SPEAKERS

2 TRACK A, B, and C buttons

• Selects the signal at the 2 Track A, B, or C in-

put as the Control Room source.

• These inputs can be selected independently or

together for simultaneous playback along with
the MASTER L-R button.

Note:

When DIGITAL IN 1 or DIGITAL IN 2 are selected,

MASTER L-R and 2-TRACK inputs are unavailable.

CONTROL ROOM

COPY MIX TO CUE

AUX 9-10

AUX 11-12

CONTROL ROOM

COPY MIX TO CUE

AUX 9-10

AUX 11-12

LEVEL

LEVEL

PHONES/CUE MIX 1

PHONES/CUE MIX 2

Advertising