Motorola L403C - Manual (Page 30)

30 Personal Settings
6.3 Advanced Corded Base Settings
6.3.1 Set the corded base name
Personalize your corded base with a name or location
like Peter or Bedroom. Maximum 12 characters are
supported.
1. Press
P
and
,
to select Settings .
2. Press
P
and
,
to select Base Name .
3. Press
P
and edit the corded base name.
4. Press
P
to save.
NOTE
The corded base name will be displayed in idle screen.
6.3.2 Set the display language
You can change the display language. When the menu
language is changed, the voice prompt language of
answering machine will also be changed accordingly.
1. Press
P
and
,
to select Settings .
2. Press
P
and
,
to select Language .
3. Press
P
and
,
to the language you want.
4. Press
P
to save.
6.3.3 Set the dial mode
The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press
P
and
,
to select Settings .
2. Press
P
to select Dial Mode .
3. Press
P
and
,
to select Tone or Pulse .
4. Press
P
to save.
NOTE
If pulse mode is selected, press
*
to switch from
pulse to tone dialing temporarily when dialing out. After
the call is ended, the dial mode will resume to pulse.
6.3.4 Set the flash time
The default flash time is 600ms . It is unlikely that you should
need to change this setting unless advised to do so.
1. Press
P
and
,
to select Settings .
2. Press
P
and
,
to select Flash Time .
3. Press
P
and
,
to the flash time you want.
(8 options are available: 90 , 100 , 110 , 250 , 300 , 400 , 600
and 700ms )
4. Press
P
to save.
6.3.5 Set the area code
1. Press
P
and
,
to select Settings .
2. Press
P
and
,
to select Area Code .
3. Press
P
and enter the area code (3-digit only).
4. Press
P
to save.