Motorola L403C - Manual (Page 34)

34 Using your Answering Machine
3. Press
P
and
,
to select the answer mode
you want. (3 options are available: Answer Off , Annc &
Record and Announce Only )
NOTE
Annc & Record invites your callers to leave a message.
Announce Only lets callers hear your announcement but
they cannot leave a message.
4. Press
P
to save.
7.4.2 Message alert on/off
If the message alert is turned on, the corded base will
give a short alert beep at the speaker volume set, when
there is a new message recorded on the answering
machine.
1. Press
P
and
,
to select Answer Machine .
2. Press
P
and
,
to select Message Alert
3. Press
P
and
,
to turn on/off the message
alert.
4. Press
P
to save.
7.4.3 Set the number of rings
1. Press
P
and
,
to select Answer Machine .
2. Press
P
and
,
to select Number of Rings .
3. Press
P
and
,
to select the number of
rings. (4 options are available: Toll Saver , 2 Rings , 4
Rings and 6 Rings )
NOTE
If Toll Saver setting is selected, the answering machine
will pick up after two rings if there are new messages,
and after four rings if there are no messages.
4. Press
P
to save.
7.4.4 Record a memo
You can record a memo which is stored on your
answering machine and played back like a normal
message.
1. Press
P
and
,
to select Answer Machine .
2. Press
P
and
,
to select Record Memo .
3. Press
P
to start recording.
4. Press
P
again to stop recording and save the
message. The just saved message is played
automatically.
You can also record memo by pressing and holding
r
to start recording after a "beep" sound is heard.
Press
P
to stop recording and save the message.
NOTE
When playing the message, pressing
M
will delete it.