Makita FP2 Series - Manual (Page 12)

1
Basic CPUs
FP2
1
The functions for a medium-scale PLC are squeezed into a compact body.
Perfect when combining various devices.
Features
1. Compact body
The functions for a medium-scale PLC are squeezed into a compact body which
requires minimal installation area (H: 100, W: 140, D: 108.3mm).
2. Module specifications enable flexible design
Backplanes for 5, , 9, 1, and 14 modules are available, and since the units have
the same width, you can choose the most economical design for your application.
3. RS232C port is standard
RS3C port allows connection with operation display panels and host computers,
as well as remote surveillance using modems, etc.
4. Different memory options are available to meet your application
Memory units for comment, calendar timer, expansion RAM, and ROM operation
are available so you can add just the options you need.
5. Dedicated instructions for high level data processing
Real number data operation is naturally supported, which simplifies programming.

Power supply
Description Item
Description Item Description Item Description Item
Description Item
Number of I/O points
Expansion
Operation speed
Built-in memory
Memory capacity
Internal relay
Timer/Counter (T/C)
Data register
0.35 Ms/step (Basic instuction)
RAM (ROM is optional)
Approx. 16k steps
4048 points
1024 points in total
6000 words
Analog I/O
High-speed
counter
Pulse output
RS232C
port
Serial
Available by adding analog input
and analog output units
Available by adding high-speed
counter unit (max. 200kHz)
Positioning unit 2-axis
Positioning unit 4-axis
Standard equipped with CPU
unit
Expandable by adding C.C.U.,
M.C.U. and serial data unit
Expandable by adding M.C.U.
Available by adding high-speed
counter unit or pulse I/O unit
S-LINK,
MEWNET-F
MEWNET-W2 (Wire)
MEWNET-W0
PROFIBUS, DeviceNet,
CANopen
Linkable by using tool port or
COM. port on CPU unit. Also
available by adding M.C.U. and
C.C.U.
Available
Remote I/O
PLC Link
Computer Link
Modem connection
Program block-edit
during RUN
Constant scan
Clock/Calendar
function
100V to 120VAC / 200V to 240VAC /
100V to 240VAC, 24VDC
(varies with different models)
12V to 24VDC, 24VDC
pcommon
Relay 2A to 5A / Transistor 0.1A
to 0.5A
(varies with different models)
Input
Output
Interrupt input
Up to 768 points
Up to 1 backplane
Units: 25 max. I/O points: 1,600 max.
Remote I/O points: 2,048 max.
Up to 3 backplanes
Units: 32 max. I/O points: 2,048 max.
Remote I/O points: 2,048 max.
RS422
RS485
Operation
memory
H type
Standard
Available
Available
Can be used with the addition of
the calendar function option
Product numbers
Standard Type CPU
CPU with 64points input
CPU with S-LINK FP2-C1
FP2-CS1D
FP2-C1SL
Power supply/I/O specifications  Special functions  Other built-in functions 
Performance specifications 
Special network functions 
09/2007