Makita FP2 Series - Manual (Page 18)

18
Xxxxx Xxxxxxxx
Xxxxx Xxxxxxxx
Xxxxx Xxxxxxxx
18
FP2-C2 FP2-C2P FP2-C3P
F-ROM/EP-ROM
Item
Available
Available
0.35 µs or more
0.93 µs or more
16k steps
32k steps
Max. 768 points
Max. 512 points
Max. 1600 points
Max. 2048 points
Max. 2048 points
4048 points
6000 words
0 to 143,333 words
(w/expansion 0 to 30,717 words)
256 words
F-ROM/EP-ROM
Optional memory unit
Optional memory unit
FP2 CPU unit FP2SH CPU unit
0.03 µs or more
0.06 µs or more
60k steps
Not available
120k steps
Not available
14,192 points
10,240 words
32,765 words x 3 banks
8448 words
Max. 768 points
Max. 512 points
Max. 1600 points
Max. 2048 points
Max. 8192 points
Small PC card (F-ROM/S-RAM)
−
5A max.
30VDC 1A
When the ALARM LED of CPU unit is lit
1c contact
Between input and ground terminals, 0.75mA or less
1500VAC for 1 minute (between input and ground terminals)
100 M Ω 500VDC (between input and ground terminals)
20,000 hours at 55 °C
Built-in overcurrent protection
Built-in type
M3
Item FP2-PSA1
100V - 120VAC
0.4A or less (at 100VAC)
85 to 132VAC
1 modul 1 modul 2 module 2 module
FP2-PSA2
200V - 240V
0.2A or less (at 200VAC)
47Hz ~ 63Hz
170 to 264VAC
FP2-PSA3
100V - 240VAC
0.7A or less (at 100VAC) 0.4A or less (at 200VAC)
30A or less (25 °C)
85 to 264VAC
FP2-PSD2
24VDC
2.5A or less
10A or less
20.4 to 31.2VDC note)
40A or less (55 °C)
2.5A max.
Item 16-point DC input type
FP2-X16D2
12 - 24VDC
Approx. 8mA (at 24VDC)
Approx. 3k Ω
9.6V/4mA
2.5V/1mA
0.2ms or less
0.2ms or less
8 points/common
Terminal block (M3 screw)
32-point DC input type
FP2-X32D2
24VDC
Approx. 4.3mA (at 24VDC)
Approx. 5.6k Ω
19.2V/4mA
5.0V/1.5mA
0.2ms or less
0.3ms or less
32 points/common
One 40-pin connector
64-point DC input type
FP2-X64D2
24VDC
Approx. 4.3mA (at 24VDC)
Approx. 5.6k Ω
19.2V/4mA
5.0V/1.5mA
0.2ms or less
0.3ms or less
32 points/common
Two 40-pin connectors
FP2-XY64D2T
24VDC
Approx. 4.3mA (at 24VDC)
Approx. 5.6k Ω
19.2V/4mA
5.0V/1.5mA
0.2ms or less
0.3ms or less
32 points/common
Two 40-pin connectors
FP2-XY64D2P
24VDC
Approx. 4.3mA (at 24VDC)
Approx. 5.6k Ω
19.2V/4mA
5.0V/1.5mA
0.2ms or less
0.3ms or less
32 points/common
Two 40-pin connectors
I/O mixed unit (input side) DC input unit
OFF→ ON
ON→ OFF
FP2-C1
FP2-C1D
FP2-C1SL
Operation speed
High-level
Built-in RAM
With expansion
With expansion
Conventional type
H type
Conventional type
H type
Link register
File register
Data register
Internal relay
With remote I/O
No expansion
Basic
Program capacity
Number of I/O points
Operation memory
Optional memory
Comment memory
Clock/Calendar function
Note: Allowable voltage fluctuation range after startup for the FP2-PSD2 is -35% to +30%. At startup, apply -15% to + 30% the rated voltage for 100ms or more.
DC input type/Transistor output (NPN) type DC input type/Transistor output (PNP) type
1) 2) 3)
Rated voltage
Current consumption
Surge current
Rated frequency
Operating
Voltage range
Input
Output
Alarm contact capacity
Alarm contact operation
Alarm contact type
Leakage current
Breakdown voltage
Insulation resistance
Guaranteed lifetime
Overcurrent protection function
Fuse
Terminal screw
Module size
Rated input voltage
Rated input current
Input impedance
Min. ON voltage/Min. ON current
Max. OFF voltage/Max. OFF current
Response
time
Input points per common
Connection method
(Either the positive or negative of the input power
supply can be connected to the common terminal.)
Notes: The number of ON points that can be actuated simultaneously is limited by the input voltage and the ambient temperature.
1) The specifications also apply to the input side of the CPU unit with 64 input points "FP2-C1D".
2) The specifications also apply to the DC-input, transistor-output (NPN) type I/O-mixed unit with ON pulse catch input "FP2-XY64D7T".
However, the response time is as follows: OFF→ ON: 0.2ms or less (X0-X1F); ON→ OFF: 0.3ms or less (X0-X1B), 1.0 to 5.0ms (X1C-X1F)
3) The specifications also apply to the DC-input, transistor-output (PNP) type I/O-mixed unit with ON pulse catch input "FP2-XY64D7P".
However, the response time is as follows: OFF→ ON: 0.2ms or less (X0-X1F); ON→ OFF: 0.3ms or less (X0-X1B), 1.0 to 5.0ms (X1C-X1F)
CPU units 
Power supply units 
FP2/FP2SH
Specifications
09/2007