Micro Technic Micronix PV-5127 - Manual (Page 8)

Users Manual & Installation Guide
PV- 5127: Power supply module with UPS
Page 8 of 31
Connectors
The PC-5127 is equipped with nine connectors:
Power input connector (KL2)
Power into PV-5127 (Mains and battery) is supplied through KL2 that is a four-pole removable
screw clamp connector. The layout of this connector is printed in the silkscreen on the heatsink.
Power output connector (KL3)
Power out of PV-5127 (+5V and +12V) is applied to KL3 that is a five-pole removable screw clamp
connector. The layout of this connector is printed in the silkscreen on the heatsink.
Output voltage indicators
Three green LEDs indicate presence of the output voltages +5V, +5V Standby, and +12V.
*
+,
*
*
+,
*
+,
# $*
+,
-
.
/
/
0
1 2 (
'
#
"-
*
*
34#
*
5
3
!
"
(
6
7
7
7
1
'
8
/49