Battery installation – Memorex MMP8560 User Manual

Page 7

Advertising
background image

BATTERY INSTALLATION

6

When the bars in the battery indicator (in the display) become

low, replace the battery as follows.

BATTERY PRECAUTIONS

Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.

2. Be sure to follow the correct polarity when installing the battery as indicated. Reversed batteries

may cause damage to the device.

3. If the device is not to be used for a long period of time, remove the battery to prevent damage or

injury from possible battery leakage.

4. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

(Follow battery manufacturer’s directions.)

Batt.

Low

Batt.

Full

Hold the unit as shown at the figure.

1

Then pull out the Peel from the top edge.

2

Insert one (1) “AAA” battery as shown. An

alkaline battery is recommended for the longest

playing time.

3

NOTES:

Before removing the Peel, make sure

the headphones are removed from the

Headphone jack.

Refer to the next page (Step 3 through

Step 6) for how to replace the Peel.

Advertising