Memorex MMP8560 - Manual (Page 8)

7
1 2
3 4
NOTE: Before removing the Peel, make sure the headphones are removed from the Headphone jack.
REMOVING & REPLACING THE PEEL
To remove the Peel, hold the unit as shown
at the figure.
Then pull out the Peel from the top edge.
To replace the Peel, pull out the USB cover
slightly.
Make sure the tabs at the Peel are aligned
to the corresponding slots on the main unit.
5
Make sure the USB cover is inserted through
the USB hole in the peel (a), then press the
middle area of the peel unit it locks in place.
Remove the Peel and replace the Peel with one of the included Peels as follows:
Press on the left and right side of the
peel until it is securely on the unit (a).
Replace the USB cover (b).
a a
b
6