Metrik Mobile Electronics MCD795 - Manual (Page 5)

Page 4
PRECAUTION OF DISC PLAY:
Cleaning the CD:
Before playing a CD, wipe it off with a clean, dust-free cleaning cloth.
Wipe the disc in the direction of the arrow.
Always insert the CD with the label side facing upwards.
If the CD is inserted with the printed side facing downwards, the device may be
damaged.
Note: If there is already a CD in the CD slot, do not try to insert a second CD.
This may damage the device.
Always hold CDs by the edge. In order to keep the CD clean do not touch the surface.
Pull out the CD as shown below.
Do not attach any sticker or adhesive tape on the CD.
Do not expose the CD to direct sunlight or sources of heat such as heating vents.
Do not leave CDs in a car if it is parked in direct sunlight as that will lead to a con-
siderable rise in the temperature inside the car.
Note: Do not use any solvents such as petrol or thinning agents.
Commercially available cleaning substances or antistatic spray. This will damage
the device.
6.7. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS
a) During RADIO mode:
Press the >>| or |<< button shortly to manual tune up/down for the
desired radio station frequency with step by step.
Press and hold the >>| or |<< button for longer 0.5 seconds, to automatically
tune up/down for the radio station frequency of strong signal.
b) During CD/MP3 playback mode:
Press the >>| button briefly to play next track. Press the |<< button once to
play the current track from the beginning of the current track.
Press the |<< button twice continuously to play the previous track.
When the >>| or |<< button is pressed long (more than 1 seconds) for skip
forwards or backwards.
8. BAND BUTTON
Press the BND button briefly to select the radio broadcasting band you would
like to hear. The MW/FM band is toggled cyclically through the tuning bands
->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->.
9. MODE BUTTON
1) When a CD/MP3 disc is existed inside the CD slot, press the MODE button
shortly to change between CD/MP3 and RADIO mode each other.
The LCD display appears radio reception information when you change it
to radio mode; The LCD display appears CD/MP3 playback information when
you change it to CD/MP3 playback mode.
2) When there is no a disc inside the CD slot, the button has not the function of
mode changing.
10. MUTE BUTTON
This button serves to switch the MUTED state on/off.
Press the MUTE button to suppress the loudspeaker temporarily, and press
again to resume listening. The muted state will be also released when the
MODE, BAND, SEL button is pressed and VOL knob on the front panel is used.
11. INFRARED REMOTE CONTROL SENSOR
12. A.P BUTTON (Auto-storage /Preset scan)
During radio mode:
1) when long pressing for more than 1 seconds, the radio searches from the
current frequency and checks the signal strength level until 1 cycle search
is finished. And then 6 strongest stations frequency are preset to the cor-
responding preset memory numbered bank. The auto-storage operation is
implemented in the each selected band. When the auto-storage operation
is finished, the radio execute the Preset Scan
2) when short pressing, the radio searches for each preset station in the
current band. When the field strength level is more than the threshold level
of stop level, the radio is holding at that preset number for 5 seconds with
releasing mute, and than search again.
Page 11