Using contacts, Changing views – Motorola Organizer User Manual
Page 16
10
Chapter 2
You will then see a dialog displaying the telephone number
being dialed, as shown below.
To end a call, press the clipOn’s
key again, press the
phone’s End key, or close the phone.
Using Contacts
Using Contacts, you can view and create contact information
such as names, phone numbers, and addresses.
You can also make telephone calls quickly and easily, as
described in “Calling with the StarTAC clipOn” on page 9. To
enter the Contacts module from the Home screen, highlight the
Contacts icon, and press
.
Changing views
You will see either a category name or “All Cards” at the top
right of the screen. “All Cards” means that you are viewing all
the categories in your clipOn. If you have only one cardfile
category (or no categories), “All Cards” will not appear.
Now you can:
Scroll through the alphabetical tabs with
or
.
Go to a specific lettered tab by pressing
, and then using
or
. You can view a specific card by pressing
,
and then using
or
. Press
again to view the
details, and
to switch among the address, number, and
note views of the card (the Contact information determines
which views are available). The selected view is indicated
View the number that
is being dialed.