Meridian America DSP8000 - Manual (Page 13)

9
Setting up
the DSP8000
loudspeakers
To dismantle the loudspeakers
It is advisable to remove the head units when moving
the speakers. This is achieved by disconnecting the
head lead from the head unit and lifting off the head.
Take care while the head is not in position as this
exposes its mounting spikes. While not in place the
head should be stored safely but care should also be
taken of the surface they are placed upon as it may be
damaged by the cups.
When dismantling the speakers always disconnect and
switch off the power first.
Note: Do not disconnect the head lead while
the unit is connected to the AC supply and
switched on.