Meridian America DSP8000 - Manual (Page 29)

25
Configuring
the DSP8000
loudspeakers
Initially all sources will be configured to use the primary
input you have specified, but you can configure
individual sources to use the other input; see
To
configure a source, page 27.
For example, to define the left speaker as
a slave using the digital co-axial connectors:
The display shows: L.S.Coax
When you have configured the loudspeaker:
Switch off the DSP loudspeaker, using the power
switch on the back, and then switch on again to
restore normal operation. •