Minolta E260 - Manual (Page 139)

Clear any paper you see.
T
HERE MAY BE EXCESS TONER IN THE PAPER PATH
Contact Customer Support.
Solid black or white streaks appear on transparencies or paper
These are possible solutions. Try one or more of the following:
M
AKE SURE THE FILL PATTERN IS CORRECT
If the fill pattern is incorrect, choose a different fill pattern from your software program.
C
HECK THE PAPER TYPE
• Try a different type of paper.
• For transparencies, use only ones recommended by the printer manufacturer.
• Make sure the Paper Type setting matches what is loaded in the tray or feeder.
• Make sure the Paper Texture setting is correct for the type of paper or specialty media loaded in the tray or
feeder.
M
AKE SURE THE TONER IS DISTRIBUTED EVENLY IN THE TONER CARTRIDGE
Remove the toner cartridge and shake it from side to side to redistribute the toner to extend the life of the cartridge,
and then reinstall it.
T
HE TONER CARTRIDGE MAY BE DEFECTIVE OR LOW ON TONER
Replace the used toner cartridge with a new one.
Contacting Customer Support
When you call Customer Support, describe the problem you are experiencing, the message on the display,
and the troubleshooting steps you have already taken to find a solution.
You need to know your printer model type and serial number. For more information, see the label on the inside
top front cover of the printer. The serial number is also listed on the menu settings page.
In the U.S. or Canada, call (1-800-539-6275). For other countries/regions, visit the Lexmark Web site at
www.lexmark.com.
Troubleshooting
139