Understanding printer messages, Checking the virtual display, List of status and error messages – Minolta E260 User Manual
Page 93: Busy, Canceling, Close front door, Flushing buffer, Hex trace, Invalid engine code, Invalid network code
Understanding printer messages
Checking the virtual display
When the Embedded Web Server is open, a virtual display appears in the top left corner of the screen. It works as an
actual display would work on a printer control panel, showing printer messages.
To access the Embedded Web Server, type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in
the TCP/IP section.
The virtual display appears in the top left corner of the screen.
List of status and error messages
Busy
Wait for the message to clear.
Canceling
Wait for the message to clear.
Close front door
Close the front door of the printer.
Flushing buffer
Wait for the message to clear.
Hex Trace
The printer is in Hex Trace mode.
Invalid Engine Code
You need to download valid engine code for the printer.
Note: Engine code may be downloaded while this message appears on the display.
Invalid Network Code
You need to download valid network printing code for the internal print server. The internal print server is a hardware
option installed inside the printer.
Note: Network code may be downloaded while this message appears on the display.
Understanding printer messages
93