Mace CAM91 - Manual (Page 15)

Operating Your Camera
28
Day&Night Color CCD Camera
29
Day&Night Color CCD Camera
Operating Your Camera
Manual
To fine adjust, select the Manual mode. You can increase or decrease the red
or blue factor while monitoring the difference on the screen. Set to ‘Manual’
mode and press the ‘SET’ button.
Increase or decrease the value for red(R-Gain) and blue(B-Gain), watching the
color of the picture, and press the SET button when you obtain the best color.
Motion Detection
Your camera transmits an alert signal when it detects motion of an object on the
screen. If you connect the camera to an external alarm, you can pay attention to
the screen when the alarm sounds. This feature is useful when you have to
monitor several screens simultaneously.
1. Press the SET button to display the setup menu and move the arrow indicator
to ‘Motion Detect’ using the UP or DOWN button.
Change the range using the
LEFT or RIGHT (-20 ~ +20) Red 0
Blue 0
Press SET to Return
Select On using the
LEFT or RIGHT button
Setup
Camera ID
BLC
Lens
Shutter
Gain
White Balance
Motion Detect
Color
Sync.
Reset
End OFF
OFF
DC
OFF
AGC
ATW
ON
AUTO
INT
Change the zone using the
LEFT or RIGHT button
Zone area is displayed
Motion Detection
Top 4
Bottom 9
Left 3
Right 10
Sensitivity 8
Output Type POSI
Press SET to Return
SET button pushed
I