Mace CAM91 - Manual (Page 19)

External Connecting Terminal
36
Day&Night Color CCD Camera
37
Day&Night Color CCD Camera
Specification
The Color/BW mode change can be controlled by an external sensor or other
equipment connected on the DN terminal(Day&Night)on the back side of
camera.(Optional Function)
When you use Motion Detection mode, the appointed signal is output in every
time motion detected.
1.DN Input Terminal(over Pull-up input of DC 5V,0.2mA)
Open contact: Color mode
Closed contact: B/W mode
2.Motion Detect Output Signal Level
At POSI(Positive)mode
At NEGA(Negative)mode
At ALARM :You can connect an extra an equipment like lamp or buzzer on
the external of camera. The output is an open collector under DC
16V/100mA.
OFF : Open
ON : under 100mA
0V
No motion appeared
4.0V~5.0V
Motion appeared
2.5 0.5sec.
4.0V~5.0V
No motion appeared Motion appeared
0V
2.5 0.5sec.
Image Sensor
Picture Elements
Effective Pixels
Scanning System
Resolution
Shutter Speed
S/N Ratio
Video Output
Min. Illumination
Sync. System
Back Light
Iris Mode
White Balance
Lens Mount
Color
O.S.D
RS-232C comm.
Power Supply
Power Consumption
Operating Temperature
Operating Humidity
Dimension
1/3” SONY SUPER HAD IT CCD
811(H) 508( V) 795(H) 596( V)
768(H) 494( V) 752(H) 582( V)
480(Color)/520(BW)TV Lines Horizontally
1/60~1/10,000sec 1/50~1/10,000sec
More than 48dB(AGC OFF)
1.0 Vp~p NTSC composite 1.0 Vp~p PAL composite
Internal/Line Lock selectable
ON/OFF selectable
DC Iris/Video Iris/ESC selectable
ATW/AWC/MANUAL selectable
CS-mount(or C-mount with the supplied adaptor)
AUTO/ON/BW/EXT.selectable
Built-in
Available
AC 24V,60Hz/DC 12V(Non polarity) AC 24V,50Hz/DC 12V(Non polarity)
MAX. 3.0watt.
-10 ~ +50 …
90% RH Max.
62(W) 52(H) 133(L)mm (Without Lens)
2:1 Interlace(NTSC Standard)
525 Line/60Fields/30Frames
2:1 Interlace(PAL Standard)
625 Line/50Fields/25Frames
0.5Lux at F1.2(Color)
0.03Lux at F1.2(B/W)
ITEM NTSC PAL
D/N Input GND Motion Detect Output
Day/Night External Signal Input/Motion Detect Output