Marquis 2802CID - Manual (Page 11)

11
Wall Mounting Your 2802CID
The TMX 2802CID was designed to be
conveniently wall mounted. There is no
additional hardware required. Follow these
easy steps:
1. The handset retaining clip must be
engaged to secure the handset when
hanging up. To engage the clip,
unsnap the clip, rotate the clip 180º and
then snap the clip into place.
2. The bottom of the 2802CID has a
mounting wedge that must be re-
positioned for wall mount use.
This wedge will allow the telephone to
be at the correct angle when wall
mounted.
To install the wedge for wall mounting,
remove the two (2) screws that secure
the wall mount wedge to the base unit.
Next, press the two release tabs on the
wedge as shown. The wedge will snap
off. Rotate the wedge and snap into
place for wall mounting.
INSTALLATION