Marquis 2802CID - Manual (Page 23)

23
Displaying Caller Identification
(Caller ID) Information
The 2802CID Caller ID feature was designed for
use in a hotel guest room environment primarily
for call screening purposes. Caller ID name and
number information will be displayed after the
1st incoming ring signal. There are two (2)
display possibilities for the Caller ID information:
1. Guest Elects To Answer The Call
If the guest elects to answer the incoming call,
the Caller ID name & number information will
immediately clear upon answering the call.
2. Guest Elects To NOT Answer The Call
If the guest is not in the room, available or
elects to have the incoming call go to the
system voice mail, the Caller ID name & number
information will display for 15 MINUTES and
then automatically clear itself.
Note:
If multiple incoming calls are not answered,
the LCD will display the MOST RECENT Caller
ID name and number information that was
received. The 2802CID does NOT store
multiple Caller ID calls for reviewing at a
later time.
TELEMATRIX
12/01
PM
12:00 NEW
CALL #
01 719- 638- 8821
An example of an incoming call
OPERATION