Marquis 2802CID - Manual (Page 13)

Power Pack “LINE” Connection
The power pack “LINE” connection is used to
connect the telephone lines from the wall
jack to the telephone.
Using the 3’ modular telephone line cord
provided, connect the first end of the cord to
the RJ14 telephone jack on the wall or base
board. The remaining end of the cord plugs
into the “LINE” side of the power pack.
13
Input Connection
Power Pack “PHONE” Connection
The power pack “PHONE” connection is used
to provide both the telephone lines and the
power source to the 2802CID telephone.
Using the 15’ modular telephone line cord
provided, plug the first end of the line cord
into the back of the 2802CID. Plug the
remaining end to the power pack jack labeled
“PHONE”.
IMPORTANT!
The 2802CID will not function if the line cord
connections are not correct. If the LCD display
does not activate upon installation, make sure that
the telephone line cord connections are not
reversed (“LINE”/”PHONE”).
INSTALLATION