Mazda 2010 Tribute - Manual (Page 3)

3 4
Seats
ELECTRONICALLY OPERATED DRIVER SEAT
Slide/Tilt Switch
Seat can be moved back and forth, raised,
lowered, or tilted with this control.
Lumbar Adjustment
(Located on inboard side of driver’s seat)
Rotate clockwise to increase support or
counterclockwise to decrease support.
Recline Lever
Pull the lever up to adjust
the seatback angle.
SPLIT-FOLDING REAR SEATbACkS
Folding Down the Seatbacks
1 After checking that the rear seats are clear, remove the rear seat head
restraints and store under the front seat.
2 Pull the seat cushion release strap, and flip the seat cushion forward.
3 Pull the seatback release lever (on top of the outboard side of the seat)
toward the front seat and rotate the seatback down to the flat position.
Returning the Seatbacks to the Upright Position
1 Lift the seatbacks upright until they lock into position and the RED
seat unlatched indicator on the seatback release lever is not visible.
2 Rotate the seat cushion down into the seating position, making sure
that the seat cushion is locked.
3 Reinstall the head restraints to the original position on the seatbacks.
Seat Cushion
Release Strap
Seatback
Release Lever
182421_10a_Mazda_Tribute_SSG_062409.indd 4-5 6/24/09 2:45:10 PM