Audio controls – Mazda 2010 Tribute User Manual

Page 9

Advertising
background image

Audio Controls

15

16

AUDIO SYSTEM ON

Push the Power/Volume dial to
turn the radio on.

MEDIA SELECTION

Radio: Push AMM button to select
the FM1, FM2, or AM band.
CD: Push CD button to select the
CD player.
Auxiliary Input: Push the AUX button
repeatedly until LINE IN appears in the
display to select the auxiliary jack.
Satellite Radio: Push the SIRIUS
button for SIRIUS

®

Satellite radio.

See the Owner’s Manual for
more details.

NOTE:

PHONE (Not available

on Tribute)

TUNING

The radio has the following
tuning controls:

Manual: Turn the TUNE dial to

manually change the frequency.

Seek: Push the SEEK/TRACK
tuning buttons to automatically
seek a higher or lower
frequency with a station.

Scan: Push the SCAN button to

automatically sample strong
stations for seconds each. Push
again to cancel.

Preset Channel: Push the
preset channel buttons (1-10)
to select a station stored in
memory. To store a station,
push and hold a button (1-10)
until sound returns.

AUTOSET Tuning

AUTOSET allows you to set the

strongest local radio stations without

losing your original manually set

preset stations for AM/FM1/FM2.

Refer to your Owner’s Manual for

complete details.

DIRECT

Push this button to access the

desired radio station, track or

MP3 folder.
Radio: Push the DIRECT button,

then push the desired radio station

using the memory presets.

CD: Push the DIRECT button;

DIRECT TRACK MODE SELECT

TRACK will be displayed. Enter

the desired track number and the

system will begin playing that track.
MP3 Folder: Push the DIRECT

button and the desired folder

number; the system will advance

to the selected folder.

1. Turn the ignition switch to

the ACC or ON position.

2. Push AUDIO power ON.
3. Push the CLOCK button to

display SET TIME.

4. Use the memory presets to

set hours (buttons 0-9)
and minutes.

5. Push the OK button

to confirm.

SETTING YOUR CLOCk

PORTAbLE AUDIO PLAYER INTEGRATION USING THE AUx jACk

Your vehicle is equipped with an AUX or auxiliary jack that will allow you

to play your portable audio player through the vehicle’s audio system.

Learn the system when parked and do not let it distract you while driving.
NOTE:

You will need a cable with an 1/8 inch mini stereo plug to connect your

portable audio player into the aux jack.

1 Locate the AUX jack on the center console.

2 Plug 1/8 inch mini stereo plug into the portable audio player and

into the AUX jack. Turn portable audio player on.

3 Turn the vehicle audio system on.

4 Push AUX on the vehicle radio repeatedly until LINE IN appears in

the display.

5 Use the portable audio player controls to play music.

NOTE:

Set the volume level on your portable audio player to the highest level

before distortion starts. Then adjust the volume in the vehicle using the audio

system power/volume control.

182421_10a_Mazda_Tribute_SSG_062409.indd 16-17

6/24/09 2:46:14 PM

Advertising