Mazda 2010 Tribute - Manual (Page 8)

Feature Highlights
13 14
Headlamp Control
Rotate knob to the icon shown for the
following functions:
: Lamps off
: Turns on tail, parking, and
dashboard lamps.
: Turns on tail, parking,
dashboard, and headlamps.
: With ignition ON, the light sensor automatically determines when to
turn the headlamps, other exterior lights and dashboard illumination
on or off.
: Pull the headlamp control knob toward you while in , or to
operate the fog lamps. The fog lamp indicator will illuminate.
DAYTIME RUNNING LAMPS (DRL)
Operates the low beam headlamps with a reduced output.
To activate, turn the ignition on and turn the headlamp control to off, or
select the park lamps or autolamp position.
NOTE: A vehicle equipped with an automatic transmission must be shifted out of
P (Park) for the DRL to activate. A vehicle equipped with a manual transmission
must have the parking brake released for the DRL to activate.
MAx
A/C
Selector Dial
Push to turn
the Climate
Control system
ON and OFF.
Push to
manually turn
air conditioning
on or off.
Push to
recirculate
cabin air to
reduce outside
odors and
improve cooling
(indicator on) or
receive fresh air
(indicator off).
Push for
maximum
cabin cooling
in recirculation
mode.
Fan Control Dial
Rotate the dial to
set desired fan
speed (1-4).
Push to defrost
the windshield
and to provide
air through the
floor vents.
Push to defrost
the windshield.
Push to defrost
the rear window.
Push to turn
driver heated
seat on or off.
Temperature
Control Dial
Rotate the dial for
temperature control;
clockwise for hot
and counterclockwise
for cold.
Dashboard Vents
Dashboard and
floor vents
Floor vents
Push to turn
passenger heated
seat on or off.
Manual Climate Control
NOTE: With defroster and floor vents or windshield defroster mode, the system
turns on the A/C compressor and selects the FRESH AIR mode. This helps
defrost the windows more efficiently by dehumidifying the air. The A/C compressor
will always be on in defroster mode, but the defroster (and floor) will deliver warm
air when the temperature dial is set to a warmer temperature and the engine
warms up.
Outside temperature: will appear in the information display and is labeled
EXT TEMP. To change the display between Fahrenheit and Celsius, push
and together.
182421_10a_Mazda_Tribute_SSG_062409.indd 14-15 6/24/09 2:46:06 PM