Meco Assie Vantage LP 67c3c8kk81 - Manual (Page 8)

8
To reduce the risk of bodily injury from lifting, the following assembly steps #s 7 and 8 will require two people.
CAUTION
!
Step 7
Hood/Body To Cart Assembly
Lift the Hood/Body Assembly over the cart assembly and set it down until it rests on the top of the cart legs.
Align the holes in the side of the Body with the holes in the legs. Insert two 1/4-20 x .50 Bolts through the holes in the
firebox flanges (Back Left Side View) and into threaded inserts in the inside face of the back legs. Insert two 1/4-20
x 1.50 Bolts through the holes in the front legs (Right Side View) and into threaded inserts in firebox flanges. Tighten
after all are installed.
Right Side View
1/4-20 x .50” Bolt set
2 pc
Back
Left Side View
1/4-20 x 1.50” Bolt set
2 pc